Do Your Stop Signs Meet MUTCD Requirements?
Seton
by Mariah Erhardt
2y ago
In an effort to improve public safety, the FHWA (Federal Highway Administration) requires that all stop signs posted on any public road must meet MUTCD (Manual on Uniform Traffic Control Devices) standards. This regulation also applies to private roads where public traffic travels. A few examples of these areas are shopping centers, airports, sports arenas, churches, parks, universities, and other privately owned facilities. What is the MUTCD? The MUTCD is the national guidebook that defines and regulates the size, color, shape, wording, and placement of all traffic control devices in the Uni ..read more
Visit website
Pipe Marking Part 5: Making Sure You Have Enough
Seton
by JSledziona
2y ago
In this series we discussed how to make your pipes ASME/ANSI compliant with Seton pipe markers. We went into detail about the compliance requirements of the ANSI A13.1-2015 standard and how Seton makes it easy for you to comply. We broke down each requirement, discussing the right color pipe markers you need based on pipe contents and what size to use depending on pipe diameter. Then we went over the styles of pipe markers that Seton offers. Although styles aren’t regulated, you should use the pipe marker that is best suited for your environment. We discussed the benefits of Seton’s self-adhes ..read more
Visit website
Pipe Marking Part 4: Choosing the Right Color
Seton
by JSledziona
2y ago
Pipe marker color is a major component when it comes to identifying the contents of a pipe. While the text legend remains the primary means of identification, you can use specific colors to identify the hazard characteristics of the contents at a glance. To comply with industry standards, follow the predetermined color scheme recommended by the ANSI Standard A13.1-2015 Scheme for Identification of Piping Systems. Pipe marker colors as a secondary piece of pipe identification underwent a major revision in 2007. Yellow/Black pipe markers are now assigned with flammable fluids, and Green/White ma ..read more
Visit website
How to Prevent Work Zone Accidents According to OSHA
Seton
by Mariah Erhardt
2y ago
OSHA created a Work Zone Traffic QuickCard with recommendations on how to make work zones safer for  on-foot workers, heavy-equipment operators and work vehicle drivers. Here are the recommendations: Instruction: Traffic control devices, signals, and message boards should be used to instruct drivers to follow paths away from where work is being done. Protection Inside the Work Zone: Approved traffic control devices, including cones, barrels, barricades and delineator posts should be  used inside work zones to direct equipment operators and vehicle drivers. Protection Outside the Wor ..read more
Visit website
Pipe Marking Part 3: Choosing the Right Size
Seton
by JSledziona
2y ago
The American National Standards Institute (ANSI) Standard A13.1-2015 Scheme for Identification of Piping Systems recommends a universal approach to pipe and valve identification. Seton makes it easy to understand how and why you should label your pipes according to this standard. One specific recommendation focuses on what size marker you should use. The size of the marker you need will change depending on the outer diameter of your pipe. Not only does a larger pipe need a larger marker, but the required letter height increases as well. If you have insulated pipes, don’t forget to take the ins ..read more
Visit website
What’s with the Pink Traffic Signs?
Seton
by Web Team
2y ago
We all regularly see orange roadside signs during our travels; the orange and black diamond-shaped signs warn us of lane closures and workers ahead. But what about those bright, fluorescent pink traffic signs? What do they mean? Fluorescent pink signs, or coral as they are sometimes known, are different than any other traffic signs on the road. The unique color captures and holds drivers’ attention, indicating a road incident ahead. Informed and alert drivers are typically more cautious, keeping emergency responders safer and reducing the chance that the drivers might actually cause secondary ..read more
Visit website
Pipe Marking Part 2: Choosing The Style That’s Right For You
Seton
by JSledziona
2y ago
The ASME (ANSI) Standard A13.1-2015 is a universal approach to pipe identification designed to eliminate the confusion of pipe contents. Recommendations in this standard include what size marker to use, what background and font color to use on your markers, and the proper placement of the pipe markers for best visibility. With Seton, you don’t need to worry about whether or not your markers are compliant since all of our stock pipe markers are guaranteed to meet ANSI standards. However, there is still an important decision to be made before ordering pipe markers for your project. Did you know ..read more
Visit website
Pipe Marking Part 1: Are You Compliant?
Seton
by Web Team
2y ago
Did you know that Seton was one of the original members on the committee that established the American National Standards Institute (ANSI) Standard A13.1-1988 Scheme for Identification of Piping Systems? ANSI recommends a universal approach to pipe and valve identification and is designed to eliminate confusion of pipe contents. The standard has been updated periodically with the most recent release in 2015 (A13.1-2015), and Seton has made it easy to understand and comply with these standards. The recommendations include label size, font size and color, background color, flow direction arrows ..read more
Visit website
4 Factors to Pick Out Pipe Markers and Valve Tags
Seton
by Andrew Pimentel
3y ago
Though it may not be the first thing that comes to mind when you think about workplace safety, identifying the various pipes and valves in your plumbing system is essential to keeping individuals safe and ensuring you are in compliance at all times. That said, there are four main factors to consider when choosing pipe markers and valve tags, according to ANSI/ASME Standard A13.1-2015: Size It’s possible — more often than not, likely — you’ll need different sized pipe markers and valve tags, depending on your project. Make sure you pick o ..read more
Visit website
10 Signs and Labels for OSHA Compliance
Seton
by Andrew Pimentel
3y ago
According to OSHA’s Specifications for Accident Prevention (29 CFR 1910.145), employers must indicate and define potential hazards around the workplace. Safety signs and labels are easy and effective ways to communicate warnings and maintain OSHA compliance. Here are the top 10 common workplace safety signs and labels for OSHA compliance: Exit Route SignsAccording to OSHA, emergency exits and evacuation pathways must be clearly marked at all times. If you have doorways or other passages that could be mistaken for exits, make sure they’re identified as well. All authorized ..read more
Visit website

Follow Seton on FeedSpot

Continue with Google
Continue with Apple
OR